Osteoporosis: How Does a Bone Density Test Assess Bone Health?
Osteoporosis: How Does a Bone Density Test Assess Bone Health?
Osteoporosis is a condition that causes bones to become weak and more likely to fracture. A bone density test measures bone mineral density (BMD) to assess bone strength, identify low bone mass and help detect osteoporosis before a fracture occurs.
Learn how a bone density test works, what a DEXA scan measures, how to understand your T-score and who may benefit from a bone health assessment.
Quick Answer: What Is a Bone Density Test?
A bone density test, also known as a bone mineral density (BMD) test, measures the amount of minerals in your bones to assess bone density and help identify osteoporosis. The most commonly used method for diagnosing osteoporosis is a dual-energy X-ray absorptiometry (DXA or DEXA) scan.
A DEXA scan commonly measures bone mineral density at the lumbar spine and hip. The result is reported as a T-score in postmenopausal women and men aged 50 and above. A T-score of -2.5 or lower at an accepted diagnostic site indicates osteoporosis under the standard densitometric classification.
Bone density testing is particularly relevant for people with a history of fragility fractures, postmenopausal women, older adults and individuals with medical conditions or medications that increase bone loss risk.
What Is Osteoporosis?
Osteoporosis is a bone disease characterised by reduced bone strength, making bones more fragile and increasing the risk of fractures. It develops when bone loss occurs faster than the body's ability to replace old bone tissue.
Healthy bones are constantly undergoing a natural process called bone remodelling. During this process, old bone is broken down and replaced with new bone tissue. When this balance is disrupted, bone mass and structural strength may gradually decrease.
People with osteoporosis may experience fractures following minor falls or everyday activities that would not normally cause a healthy bone to break.
Which Bones Are Commonly Affected?
Hip
Hip fractures can significantly affect mobility, independence and quality of life, particularly among older adults.
Spine
Vertebral fractures may cause back pain, height loss and changes in posture, including a forward-curving upper back.
Wrist
Wrist fractures may occur after a fall onto an outstretched hand, especially in individuals with weakened bones.
Forearm
Fractures involving the forearm may also be associated with reduced bone strength.
How Does Bone Density Change Over Time?
Bones are living tissues that continuously renew themselves through bone remodelling. Bone mass generally increases during childhood and adolescence, reaching peak bone mass in early adulthood.
As people age, bone breakdown may gradually exceed new bone formation. This can lead to reduced bone mineral density over time.
Bone loss may become more pronounced in women after menopause because declining oestrogen levels accelerate bone resorption. However, osteoporosis can also affect men and younger individuals with certain medical conditions or risk factors.
What Is Bone Mineral Density (BMD)?
Bone mineral density refers to the amount of mineral content, mainly calcium and phosphorus, within a measured area of bone. It is commonly expressed in grams per square centimetre (g/cm²) when measured using DXA.
Generally, lower bone mineral density is associated with weaker bones and a higher risk of fractures. However, bone strength is also influenced by bone structure, bone quality, age, previous fractures and other clinical risk factors.
What Is a Bone Density Test?
A bone density test measures how much mineral content is present in a specific area of bone. It helps healthcare professionals assess bone health, identify low bone mass and support the diagnosis of osteoporosis.
The test is also known as:
- Bone mineral density test (BMD test).
- Bone density scan.
- DEXA or DXA scan, when dual-energy X-ray absorptiometry is used.
- Osteoporosis screening test, when performed as part of a clinical assessment.
What Can a Bone Density Test Detect?
Normal Bone Density
Indicates that the measured bone mineral density is within the expected range for the relevant diagnostic classification.
Low Bone Mass
Also called osteopenia, this indicates bone density is below the normal range but does not meet the densitometric threshold for osteoporosis.
Osteoporosis
A condition associated with significantly reduced bone density and increased fracture risk.
Changes Over Time
Repeated measurements using appropriate methods can help monitor bone density changes and treatment response.
A bone density result is usually interpreted alongside medical history, fracture history, age and other risk factors rather than being considered in isolation.
What Is a DEXA Scan?
Dual-energy X-ray absorptiometry (DXA or DEXA) is the standard imaging method used to measure bone mineral density and diagnose osteoporosis.
The scan uses two different X-ray energy levels to estimate the amount of mineral content in the measured bone. The results help assess bone density at specific skeletal sites, most commonly the lumbar spine and hip.
Which Areas of the Body Are Measured?
Lumbar Spine
The lower back, usually covering the first to fourth lumbar vertebrae (L1–L4), is measured to assess bone mineral density in the spine.
Hip
The femoral neck or total hip is measured to assess bone density in an important weight-bearing area associated with hip fracture risk.
In certain situations, a forearm measurement may be used if the hip or spine cannot be measured or interpreted, or when specific medical conditions require it.
Is a DEXA Scan the Same as a Regular X-ray?
No. Although both use X-ray technology, they serve different purposes.
| Feature | DEXA Scan | Regular X-ray |
|---|---|---|
| Main purpose | Measures bone mineral density. | Produces images of bones and other structures. |
| Osteoporosis assessment | Used to diagnose osteoporosis based on accepted BMD criteria. | Not the standard method for diagnosing osteoporosis. |
| Bone density measurement | Provides quantitative BMD and T-score or Z-score results. | Does not routinely provide a quantitative BMD measurement. |
| Typical use | Bone health assessment and monitoring. | Detecting fractures and assessing bone structure. |
Why Is Bone Density Testing Important?
Bone loss can occur gradually without causing pain or obvious changes in daily activities. Many people are unaware that their bone density is decreasing until they experience a fracture.
A bone density test provides measurable information about bone health and helps healthcare professionals identify individuals who may be at increased risk of osteoporosis-related fractures.
Detects Low Bone Density
Identifies reduced bone mineral density before a fracture may occur.
Supports Osteoporosis Diagnosis
Provides T-score measurements that help determine whether osteoporosis is present in eligible individuals.
Assesses Fracture Risk
Provides important information for evaluating fracture risk together with clinical risk factors and medical history.
Monitors Treatment Response
Repeat scans may help assess changes in bone density during osteoporosis management.
Early identification allows healthcare professionals to evaluate contributing factors and discuss suitable measures to maintain bone health and reduce fracture risk.
Who Should Consider a Bone Density Test?
Not everyone requires a bone density test at the same age or frequency. The decision depends on age, sex, menopausal status, medical history, previous fractures and other risk factors.
According to the Malaysian Clinical Practice Guidelines on the Management of Osteoporosis (2022), screening is recommended for individuals with previous low-trauma fractures, clinical risk factors, secondary causes of osteoporosis, height loss or increased falls risk, as well as postmenopausal women aged 50 and above.
People Who May Benefit from Bone Density Assessment
Postmenopausal Women
Reduced oestrogen levels after menopause can accelerate bone loss, increasing the risk of osteoporosis.
Older Adults
Bone mineral density generally decreases with age, increasing the likelihood of osteoporosis and fractures.
People with Previous Fractures
A fracture following a minor fall or low-impact injury may indicate underlying bone fragility.
People with a Family History
A parental history of hip fracture or a family history of osteoporosis may contribute to an individual's risk assessment.
People Taking Certain Medications
Long-term use of oral glucocorticoids, such as certain steroid medications, may contribute to bone loss.
People with Certain Medical Conditions
Conditions affecting hormone levels, nutrient absorption or bone metabolism may increase osteoporosis risk.
Can Younger Adults Develop Osteoporosis?
Yes. Although osteoporosis is more common in older adults, younger people may also experience bone loss due to certain medical conditions, medications, nutritional deficiencies or hormonal problems.
Bone density testing in younger individuals should be considered based on clinical indications rather than age alone. The interpretation of results also differs from that used in older adults.
What Are the Signs and Symptoms of Osteoporosis?
Osteoporosis usually develops without noticeable symptoms during its early stages. Unlike conditions that cause immediate pain or discomfort, bone loss may progress gradually without affecting everyday activities.
Some possible signs associated with established osteoporosis or fragility fractures include:
Loss of Height
Gradual height reduction may occur due to compression fractures involving the spinal vertebrae.
Persistent Back Pain
Sudden or persistent back pain may occur following a vertebral compression fracture.
Changes in Posture
Some people develop a forward-curving upper back due to spinal compression fractures.
Fractures After Minor Falls
Fragile bones may break following a fall from standing height or less, or relatively minor trauma.
How Is a Bone Density Test Performed?
A central DEXA scan is generally a straightforward, non-invasive procedure. It measures bone mineral density using a specialised scanning machine and low-dose X-rays.
What Happens During a DEXA Scan?
Registration and Assessment
Your medical history, previous fractures, medication use and relevant health information may be reviewed before the scan.
Positioning on the Scanning Table
You will usually lie on your back on a scanning table while the healthcare professional positions the body for the required measurements.
Bone Density Measurement
The scanning arm moves over the body to measure bone mineral density, commonly at the lumbar spine and hip.
Results and Interpretation
The scan produces measurements and diagnostic scores that are reviewed by a qualified healthcare professional in the context of your medical history.
How Long Does a Bone Density Scan Take?
A central DEXA scan commonly takes around 10–20 minutes, although the total appointment time may vary depending on the facility, equipment and areas being assessed.
Is a Bone Density Test Painful?
No. A DEXA scan is generally painless. You simply lie still on the scanning table while the machine measures bone density. It does not involve injections or surgical procedures.
Does a DEXA Scan Use Radiation?
Yes. A DEXA scan uses a low dose of X-ray radiation to measure bone mineral density. The radiation exposure is generally very low compared with many conventional imaging examinations.
Inform the healthcare team if you are pregnant or think you may be pregnant before undergoing the examination.
How to Understand Bone Density Test Results
Bone density results are commonly reported as a T-score or Z-score. These scores compare your measured bone mineral density with a reference population.
What Is a T-Score?
A T-score compares your bone mineral density with the average bone mineral density of a healthy young adult reference population of the same sex. It is expressed as the number of standard deviations (SD) above or below the reference mean.
For postmenopausal women and men aged 50 and above, T-scores are generally used to classify bone density at accepted diagnostic sites.
Bone Density T-Score Categories
| T-Score | Category | What It Means |
|---|---|---|
| -1.0 or above | Normal bone density | Bone density is within the normal range. |
| Below -1.0 but above -2.5 | Low bone mass (osteopenia) | Bone density is lower than the normal range but does not meet the densitometric threshold for osteoporosis. |
| -2.5 or below | Osteoporosis | Bone density meets the densitometric criterion for osteoporosis at an accepted diagnostic site. |
What Is a Z-Score?
A Z-score compares bone mineral density with that of people of a similar age, sex and reference population.
Z-scores are generally preferred for premenopausal women, men younger than 50 and children. A Z-score of -2.0 or lower is described as "below the expected range for age".
In these groups, a low Z-score should prompt clinical assessment rather than automatically being labelled osteoporosis based on the T-score classification used in older adults.
Does a Lower T-Score Mean Higher Fracture Risk?
Generally, yes. A lower T-score indicates lower bone mineral density and is associated with a higher risk of fractures.
However, fracture risk cannot be determined from the T-score alone. Healthcare professionals may also consider age, previous fractures, family history, medication use, smoking, alcohol consumption and other clinical factors.
Can a Bone Density Test Diagnose Osteoporosis Without a Fracture?
Yes. In postmenopausal women and men aged 50 and above, a T-score of -2.5 or lower at the femoral neck, total hip or lumbar spine can establish a densitometric diagnosis of osteoporosis.
Additionally, a clinical diagnosis of osteoporosis may be made following certain low-trauma hip or vertebral fractures, regardless of the measured BMD result.
How to Prepare for a Bone Density Test
A DEXA scan generally requires minimal preparation. However, following the scanning centre's instructions can help ensure accurate measurements.
Wear Comfortable Clothing
Choose comfortable clothing without metal zippers, buttons or other metal components around the scanning area.
Inform the Healthcare Team About Medications
Tell the healthcare professional about medications and supplements you are taking, particularly calcium supplements.
Report Recent Imaging Procedures
Inform the scanning centre if you have recently undergone imaging involving barium contrast or certain nuclear medicine procedures, as these may interfere with measurements.
Inform Them About Pregnancy
Tell the healthcare team if you are pregnant or may be pregnant before undergoing a scan that uses X-rays.
What Happens After an Abnormal Bone Density Result?
If your bone density test shows low bone mass or osteoporosis, your healthcare professional may recommend further assessment to determine your overall fracture risk and identify possible causes of bone loss.
Review the BMD Report
Your doctor will review the T-score or Z-score, measured skeletal sites and scan findings alongside your medical history.
Assess Fracture Risk
Additional clinical risk factors and tools such as FRAX may be used where appropriate to estimate future fracture risk.
Investigate Possible Underlying Causes
Depending on your circumstances, blood tests may be recommended to assess calcium, vitamin D, kidney function, thyroid function or other factors affecting bone health.
Discuss Management and Monitoring
Your doctor may recommend lifestyle changes, fall prevention strategies, medication or follow-up bone density measurements depending on your fracture risk.
An abnormal result does not mean that a fracture will definitely occur. The purpose of further assessment is to understand your bone health and determine whether preventive measures or treatment are appropriate.
How to Maintain Healthy Bones and Reduce Osteoporosis Risk
Maintaining bone health involves a combination of adequate nutrition, regular physical activity and management of medical conditions that may contribute to bone loss.
Get Enough Calcium
Include calcium-rich foods such as milk, yoghurt, calcium-fortified products, tofu and selected green vegetables in your diet.
Maintain Adequate Vitamin D
Vitamin D supports calcium absorption and bone health. Discuss testing or supplementation with your healthcare professional when appropriate.
Do Weight-Bearing Exercise
Activities such as walking, stair climbing and appropriate resistance exercises help support bone and muscle health.
Maintain Muscle Strength and Balance
Strength and balance exercises can help improve stability and reduce the risk of falls.
Avoid Smoking
Smoking is associated with poorer bone health and an increased risk of osteoporosis-related fractures.
Limit Excessive Alcohol Consumption
Excessive alcohol intake can negatively affect bone health and increase the risk of falls and fractures.
Why Include Bone Health Assessment in Your Health Screening?
Bone health is an important part of overall health, particularly as people get older. Identifying risk factors for osteoporosis can help healthcare professionals determine whether further bone mineral density assessment is appropriate.
Depending on your health history and clinical needs, a bone health assessment may involve several different evaluations.
| Assessment | What It Evaluates | Why It Matters |
|---|---|---|
| Bone Mineral Density (BMD) | Bone mineral content and density. | Helps identify low bone density and diagnose osteoporosis using appropriate criteria. |
| Calcium Test | Calcium level in the blood. | Helps assess calcium balance and certain conditions affecting bone metabolism. |
| Vitamin D Test | 25-hydroxyvitamin D level. | Helps assess vitamin D status, which is important for calcium absorption and bone health. |
| Kidney Function Test | Blood creatinine and estimated kidney filtration rate. | Kidney function can influence mineral balance and bone metabolism. |
| Thyroid Assessment | Thyroid hormone levels when indicated. | Some thyroid disorders may contribute to bone loss. |
| Fracture Risk Assessment | Clinical risk factors and previous fracture history. | Helps determine the likelihood of future fractures and guide further assessment. |
These assessments serve different purposes. Routine blood tests cannot replace a BMD measurement, and a general health screening package does not automatically include a DEXA scan.
If you are considering a bone density test in Johor Bahru, confirm the availability of DXA testing and the specific assessment required with the healthcare provider.
Explore Southern Health Centre's health screening packages to learn more about its available preventive health assessments.
Health Screening in Johor Bahru
Southern Health Centre provides health screening services for individuals who wish to monitor their general health and understand potential health risks through preventive healthcare.
Serving the Johor Bahru community, Southern Health Centre has locations in Taman Pelangi, Johor Bahru and Eco Botanic, Iskandar Puteri. Individuals living or working around these areas can explore the available health screening services and enquire about suitable medical assessments.
If you are concerned about osteoporosis, reduced bone density or age-related changes in bone health, consult a healthcare professional to determine whether a bone density assessment is appropriate.
Taman Pelangi, Johor Bahru
Convenient for individuals living or working around Taman Pelangi and nearby areas of Johor Bahru.
Eco Botanic, Iskandar Puteri
An additional location serving individuals around Eco Botanic and surrounding areas of Iskandar Puteri.
Visit Southern Health Centre's homepage to learn more about its healthcare services and available health screening options in Johor Bahru.
Take the Next Step Towards Better Bone Health
Understanding your bone health is an important part of preventive healthcare. Explore Southern Health Centre's health screening options and speak with a healthcare professional about the assessments that may be suitable for you.
Explore Health Screening Packages Visit Our HomepageFrequently Asked Questions About Bone Density Tests
What is a bone density test used for?
A bone density test measures the amount of minerals in your bones to assess bone strength and identify low bone mineral density. It helps healthcare professionals diagnose osteoporosis, assess fracture risk and monitor changes in bone density over time.
What is a normal bone density T-score?
A T-score of -1.0 or above is classified as normal bone density. A score below -1.0 but above -2.5 indicates low bone mass, while a score of -2.5 or lower meets the densitometric criterion for osteoporosis in eligible individuals.
What is the difference between osteopenia and osteoporosis?
Osteopenia, also called low bone mass, refers to bone density that is below the normal range but does not meet the threshold for osteoporosis. Osteoporosis is diagnosed when the T-score is -2.5 or lower at an accepted diagnostic site in eligible individuals. Both conditions may require assessment of overall fracture risk.
At what age should I get a bone density test?
The appropriate age depends on your risk factors and medical history. The Malaysian osteoporosis guidelines recommend screening for postmenopausal women aged 50 and above and individuals with relevant clinical risk factors, previous low-trauma fractures, secondary osteoporosis, height loss or increased falls risk. International recommendations may use different age thresholds for routine screening.
Is a DEXA scan the same as a bone density test?
DEXA, also called DXA, is the most commonly used method for measuring bone mineral density. Therefore, a DEXA scan is a type of bone density test and is the standard method for diagnosing osteoporosis using accepted BMD criteria.
Is a bone density scan painful?
No. A DEXA scan is generally painless and non-invasive. You lie on a scanning table while the machine measures bone density using low-dose X-rays. No injections or surgical procedures are involved.
How long does a bone density test take?
A central DEXA scan commonly takes around 10–20 minutes. The total appointment duration may vary depending on the facility, equipment and areas being assessed.
Do I need to fast before a DEXA scan?
Fasting is generally not required before a DEXA bone density scan. However, follow the instructions provided by the scanning centre, particularly regarding calcium supplements and recent imaging procedures.
Can osteoporosis be detected through a regular X-ray?
A regular X-ray may show signs of significant bone loss or identify fractures, but it is not the standard method for diagnosing osteoporosis. A DEXA scan provides a quantitative bone mineral density measurement and is more suitable for assessing osteoporosis.
Can osteoporosis occur without symptoms?
Yes. Osteoporosis often develops without noticeable symptoms. Many people only discover they have reduced bone density after a fracture or a bone density assessment. This is why screening may be recommended for individuals with relevant risk factors.
Can osteoporosis be reversed?
Although established bone loss may not always be fully reversible, appropriate treatment and lifestyle changes can help improve or maintain bone density and reduce fracture risk. Management may include medication, adequate calcium and vitamin D intake, suitable exercise and fall prevention.
How often should I repeat a bone density test?
The frequency depends on your initial BMD result, fracture risk, age and whether you are receiving osteoporosis treatment. Your doctor will determine an appropriate follow-up interval. Repeating scans too frequently may not provide meaningful information because changes in bone density can be small over short periods.
Can younger adults have a bone density test?
Yes. Younger adults may need a bone density test if they have certain medical conditions, a history of fragility fractures or medications associated with bone loss. Their results are generally interpreted using Z-scores rather than the T-score classification commonly used for postmenopausal women and men aged 50 and above.
Where can I get a bone density test in Johor Bahru?
Individuals looking for a bone density test in Johor Bahru can enquire with healthcare facilities offering DXA scanning services. Southern Health Centre has locations in Taman Pelangi, Johor Bahru and Eco Botanic, Iskandar Puteri. Contact the centre to enquire about available health screening services and whether a referral or external DXA assessment is appropriate.
Medical Disclaimer: This article is intended for general educational purposes only and should not be used as a substitute for professional medical advice, diagnosis or treatment. Bone mineral density results should be interpreted by a qualified healthcare professional alongside medical history, fracture history and other clinical risk factors. Consult your healthcare provider if you have concerns about osteoporosis, bone loss or fracture risk.
06 Nov 2026
CONTACT US
Letβs Take the Next Step
Towards Better Health
Have questions about our health screening programmes or medical services? Get in touch with our team for more information or to arrange your appointment.
We would love to hear from you.
Please feel free to contact us for any enquiry.